Pixel Technologies

Menu

Data

  • Pixel Technologies
  • Products
  • Data

  • CT-E9

    Lift Encoder

    • CT-E9

    Lift Encoder

    The CT-PX2 interface module is a multi-protocol lift encoder providing a serial link interface for both the Galaxy CAN and Otis RSL and converting these into Pixel Technologies Mode 3 DataBus protocol, providing seamless integration from lift controller to Pixels audio & visual devices.

    Categories , ,

    Overview

    The CT-E9 is an Input Encoder that provides an interface between a Lift Controller and the DesignCom 2-wire data bus.

    Downloads

    Dimension Drawings

    Details

    Operating Voltage

    12 – 24V DC (absolute maximum 33V DC)
    Operating Current

    65mA, 100mA with Wi-Fi Active
    Input Protocols

    GAL CAN, OTIS RSL
    Output Interface

    RS-485
    Output Protocols

    Pixel Technologies Mode 3
    Pixel DataBus Length

    Up to 64 nodes & 400m (max)
    Wi-Fi Access point

    802.11b/g/n
    Configuration

    On-Device HTTP Webserver
    Status Indication

    Status (RGB LED)
    Operating Temperature

    0 – 50°C
    Operating Humidity

    90% max relative humidity, noncondensing
    Mounting

    Surface mounting or DIN Rail
    Dimensions (mm)

    68(W) x 95.6(H) x 15(D)
    <h1>EM-4GE2/4L<h1> <h2>Dual SIM, Four Line, Wireless Communication Gateway<h2>
    , ,

    EM-4GE2/4L

    Dual SIM, Four Line, Wireless Communication Gateway

    Weight 0.4 kg
    Telephone Line Voltage

    48V
    Operating Current

    30mA (standard)
    Operating Range

    0 – 40mA
    Busy Tone

    425Hz. 375ms on, 375ms off
    Dial Tone

    425Hz
    Ring Signal

    64.5Vrms @ 25Hz. 400ms on, 200ms
    off, 400ms on, 2000ms off
    SIM Card

    Dual nano SIM format
    Antenna

    2dBi Antenna supplied as standard
    Mobile Network 4G

    LTE FDD: B1/B3/B4/B5/
    B7/B8/B28, LTE TDD: B40, WCDMA: B1/B2/B5/
    B8, GSM: B2/B3/B5/B8 (Telstra, Optus, Vodafone)
    Enclosure

    Industrial Compact Enclosure
    Operating Temperature

    0°C – 50°C
    Weight

    0.4Kg
    Read more

    EM-4GE2/4L

    Dual SIM, Four Line, Wireless Communication Gateway

    is equipped with Dual Wireless Mobile Network Cards and requires SIM cards from two separate network service carriers. This configuration ensures uninterrupted connectivity by allowing the secondary SIM card to operate in the event of a network failure.

    Users have the ability to set their preferred network carrier, and in the event of a detected network failure, the system will automatically switch to the secondary SIM card to maintain a connection to the help line.

    The PTE-4G card connects the system to the 4G Network and utilizes two SIM cards to provide backup between network carriers such as Telstra, Optus, and Vodafone.

    The PTE-FXS (Foreign eXchange Subscriber)interface card delivers an analogue line to the auto-dialing telephone, providing a dial tone, battery current, and ring voltage through the “plug on the wall

    SKU EM-4GE2/4L                                                                                        EM-4GE2/4L-G* Categories , , Tag
    <h3>PI-56s<h3> <h5>5.6″ Lift Position Indicator<h5>
    , ,

    PI-56s

    5.6″ Lift Position Indicator
    Screen Mode

    5.6"
    Display Type

    LCD
    Backlight

    Vibrant colour LED Display
    Resolution

    640 x 480 px
    Aspect Ratio

    4:3
    Viewing Area (mm)

    84.50 x 112.50
    Viewing Angle

    140/120°
    Operating Voltage

    24V DC
    Operating Current

    0.13A
    Pixel DataBus

    RS-485 up to 64 nodes & 400m (max)
    Spec Programming Port

    Ethernet 100BASE-T (100Mbps)
    Operating Temp / Humidity

    0-50°C, 90% max RH non condensing
    Lantern and Gong output

    150ma (max) per output
    Dimensions (WxHxD) (mm)

    165 x 103 x 26.20 205 x 116 x 28 247 x 137.5 x 28.2
    Read more

    PI-56s

    5.6″ Lift Position Indicator

    The PI Lift Display range offers all the essential lift information in vibrant colour.
    With a 5.6” ,7” and 9” display size and a compact design they are ideal for tight fixtures and car operating panels.

    SKU pi-56s Categories , ,