Introducing the SG3 Communication System – engineered with simplicity in mind, making installation and operation effortless. Specifically tailored for the elevator industry, this system delivers smooth and reliable performance even in the most challenging high-noise environments.
The modular architecture supports expansion with up to four 4-Port Elevator Group Interface Modules, enabling connection to a maximum of 16 elevators per cabinet. This adaptability is complemented by a robust emergency power backup feature, guaranteeing uninterrupted operation for a minimum of three hours (16 lift setup) in the event of a power outage.
All Digital Master units within the lift controller cabinets are wired back to a central Ethernet Hub, LX-1/M5L. The main Ethernet Hub is equipped with its own battery back-up system that powers all devices connected to its ports. This cabinet is designed for installation within the lift motor room and can power up to 16 lifts.
| Operating Voltage | 12 – 24V DC |
|---|---|
| Operating Current | 50mA (Idle), 75mA (Active) (excluding connected intercom stations) |
| Configuration | On-Device HTTP Webserver |
| Ethernet | 10BASE-T |
| Protocol | Pixel VoIP with DTMF over IP |
| StationBus | 4-wire, Up to 400m (max), 16 Stations(max) |
| Status Indication | Status (RGB LED) |
| Voice ID Message | 16 seconds (max) |
| Operating Temperature | 0 – 50°C |
| Operating Humidity | 90% max relave humidity, noncondensing |
SKU: EM-1 (Internal), EM-1/SM (External), EM-1-SPK/MIC
